Surprise Me!

837 2/2 Details❇️Four MTH O-Ga. Brill Trolleys Run Automatically on Point to Point Shuttle

2023-10-05 0 12 Vimeo

* This Video 837 Pt. 2/2 shows the DETAILS, of the O-Ga. 4-car, automatic streetcar shuttle system. A. ~~~~~~ CONTENTS, PART 2/2: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| 00:00 Start 0:42 7 Control Panel & LED Blink 4:14 7B Track Voltage 5:50 8 Z-Stuff DZ-1012 Detector 9:12 9 Test detectors w/LED Blink 11:38 10 Show Car Bumpers 13:41 11 DCC Switch or Cut Wire 15:43 12 Wiring Diagram (Control Pnl) 18:59 13 Show Logic w/Pennies 22:33 14 Show Cmds to Run Pennies 27:28 15 Flow Chart 37:40 16 Commands 43:39 16B Commands to Run 6 Cars (not used) 45:01 The END (Part 2/2) |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | B. ====== THE 2 PARTS OF THIS VIDEO 837: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * NOTE: You are NOW viewing Part 2 of 2: * Part 1 of 2: The Two Demos: Run 4 cars, then 2 cars: : . http://vimeo.com/871651464 or https://youtu.be/QxD4mln_oC8 . * Part 2 of 2: The Details: Detectors, Wiring diagram, Flow chart, Commands: : . http://vimeo.com/871654786 or https://youtu.be/F-CvdhPqqkI . |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | C. DOCUMENTATION: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Drawings, Photos, & Commands for this Video 837 are in Google Drive Album 837, at https://drive.google.com/open?id=1umoEQJhV8BpY1myqZ_6gWW9hs0rHj3BY . * Documentation for most of the O-gauge videos is on the "Documentation Website" at http://AutoControls.wordpress.com . This site has links to the corresponding Google Drive albums. * The "TOP LEVEL" Google Drive Album for Automatic Controls documentation is at https://drive.google.com/open?id=1kApw2mDqjhJzavm6EfVnLPciigBTPfUK . |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | D. RELATED VIDEOS: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ STREETCAR VIDEOS: * Earlier Video 834 shows a DCC Programmable Model Train Controller (aka NCE Mini-Panel) operating 3 MTH Protosound-3 O-Ga. PCC cars on a small loop -- using 1 infrared detector and no blocks: youtu.be/_4jDeyx9xYU or Vimeo at https://vimeo.com/695263618 . * Earlier Video 836 demonstrates a DCC Programmable Model Train Controller (aka NCE Mini-Panel) operating 7 MTH Protosound-3 Streetcars on a single loop of MTH Realtrax -- using two Z-Stuff infrared detectors and no blocks: http://vimeo.com/838819302 or https://youtu.be/hOUBx___GfE ~~~~~~~~~~ O GA. AUTOMATIC CONTOL VIDEOS: * Video 844, the "TrainProgramming.com" video -- is an "Overview" video for O Ga. automatic controls, at https://vimeo.com/654736533 . * Video 816, the "Getting Started with Train Programming" video, is at http://vimeo.com/793946078 . * Playlist #20 O-Ga. DCC, Loop, NO Turnouts -- contains several O-ga. Automatic Control videos with NO turnouts. . . https://www.youtube.com/playlist?list=PLCzsbeo2HeKFQp3iUAkOo_cdp5mNDsoFl . . https://vimeo.com/channels/autocontrols20 * ALL AutoControl **PLAYLISTS** are on the Home Page at http://AutoControls.org , and a backup copy is on the 'Documentation' site at https://autocontrols.wordpress.com/playlists/ |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | E. DETAILS for this Video 837: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * This Video 837 Pt. 1/2 demonstrates a DCC Programmable Model Train Controller (aka NCE Mini-Panel) operating 4 MTH Protosound-3 Brill Streetcars on a point-to-point, back-and-forth shuttle track of MTH Realtrax -- using two Z-Stuff infrared detectors, and no blocks. ~~~~~~~~~~ * The system is configured so that it can be used as a public display. It has a "public" pushbutton out in front, labeled "Push and Release. The public can use this public button to start the streetcars. * A "REPEAT" switch controls whether the streetcars run just 1 cycle and stop, or whether they will keep running continuously. * Atlas 205 slide switches is used to control whether all 4 streetcars run, or any combination from 1 to 3 cars. * An Atlas 56 Momentary Switch is used for the "Start" and "Reset" functions. * Two Z-Stuff DZ-1012 infrared detectors with DZ-1008 relays are used to detect when the trains enter the station area. * The outputs of the relays are connected to Inputs 6 & 8 of the Controller. |~~~~~~~~~~~~~~~~~~~~ Hashtags: Hashtags: #Midwest_Traction_Hub #3Rail_DCC_AutomaticTrainControl #AutomaticModelTrainControl * This iMovie10 video was uploaded by http://JamesIngram.net .

Buy Now on CodeCanyon