468 Key Pro III is a key programmer used to copy ID46 chips from http://www.uobd2.net/wholesale/468-key-pro-third-generation.html. It is easy for you to read and write 46 chips information. <br />The basic procedure as follows: <br />Step 1: Setup machine with probe attached. <br />Step 2: Initialize your 46C transponder chip. In the video you see it fails first time so I just rearrange it in the slot and its fine. <br />Step 3: Reset your probe by pressing and holding the left hand button (probe antenna facing up) for a second or two. This resets the sniffed data to all FF's. <br />Step 4: Attach or hold the probe on your original key and insert into ignition. On the Honda, the chip is read on insertion and doesn't need to be turned. Also, I got lucky for the video and it sniffed the data on the very first time. Most times you will need to insert and remove the key a few times until the data is captured successfully. <br />Step 5: Once captured, insert your original key in the slot and press crack. After a short while the unit will crack the encryption and read in all the original chips data. It will also at this stage show the original ISK. <br />Step 6: Finally insert the 46C that was initialized and press write to write the data to your clone chip. <br />Done. <br />I show the chip working and then also show that the chip can be reinitialized back to blank. They appear to be reusable as I proceeded to test this already used chip on another vehicle and it worked fine. <br />Although the machines main screen shows that it supports 4D and 48 cloning, neither of them are currently operational (No shock really!) <br />The 4D cloner fails trying to read any standard 4D chips. The 48 just pops up a windows "Coming Soon"
