Volvo dice 2013D <br />http://www.obdii365.com/wholesale/2013-a-volvo-diagnostic-communication-equipment.html <br />Computer configuration: <br />Computer system: Windows 7 professional 64-bit <br />Processor: more than CPU 2.0 GHz <br />Install memory (RAM): at least 4GB <br />Local Disk (C:) require: 40GB free space <br /> <br />Step1 Install Volvo vida 2013D <br />Open DVD <br />Copy patch file to the desktop <br />Click Install --DVD-Vida dvdheader-Main-setup <br />If the window pops up this notice, click YES. <br /> <br />VIDA (2013D) will setup by itself, it will take you some time, please wait patiently! <br /> <br />Choose "VIDA All-in-one" to install <br />Choose language <br />Choose Destination Folder: C:\VIDA\. Click Next <br />Accept License Agreement <br /> <br />Framework 35 and security will be installed automatically <br /> <br />Vida InstallShield Wizard setup automatically, please wait patiently until it is completed. <br /> <br />After finish, Adobe Reader 8, VIDA all-in-one, Vida on web, Vida admin and Vida configurator are all on the desktop. <br /> <br />This is Vida Configurator for internet, click Save is Okay. <br /> <br />Vida is configuring your new software installation, it will take 20-30 minutes. <br /> <br />InstallShield Wizard Complete, select " No, I will restart my computer later", then click "Finish". Because I haven't install the patch. <br /> <br />Step2 Install patch <br />Unzip patch and open it <br />Click Install <br />If the window pops up this notice, click YES. <br />Default Destination Folder C:\ , don't change it <br /> <br />If the firewall block the program, click "Allow access" <br /> <br />Step3 Install driver software <br />Connect Vida adapter to the computer <br />Find the driver name in the device manager <br />Computer-management-computer management-device Manager, find out DiCE <br />Hardware-DiCE-206751@0000000000 <br />If the driver name is incorrect, there are 3 possible reasons. <br />1) Software serial number is incorrect <br />2) System Language problem, better use English System. <br />3) The device is broken. <br /> <br />Step 4 Restart the computer <br /> <br />Step 5 Check vehicle information and diagnostics for aftersales <br />Open "VIDA all-in-one" <br />An IE browser will launch <br />Important Note: wait the icon at the lower right corner turn to green, then launch " VIDA All-in-one", if this icon is yellow or red, please wait patiently. <br /> <br />Input username "1" and click Login, it does not need to register <br />Note: you can't input the username if you don't install the patch and restart the computer. <br /> <br />Select DEFINE VEHICLE PROFILE <br />Click DICE CONFIGURATION- Test communication tool, then Click Run to self-test, click "Close" <br /> <br />Click "Read Vehicle" <br />Wait until all vehicle information read out, if some information can't read out automatically, choose them manually and click ok, otherwise, the "Diagnostics" icon is gray. <br /> <br />Click "Diagnostics", it will verify VIN and control modules automatically. <br /> <br />Click FAULT TRACE to search all ECU, Volvo car is safe, so it has many ECU. <br />Click Network to see the diagram of ECU, the car I are testing only has these ECU, some cars even have more ECU. <br /> <br />Only CEM can be communicated normally can other ECU be identified.
