Protomaker 3D Printer Threaded Rod less wobble Do NOT do this <br /> <br />Not fully tested but seems better, more to be done later. IMPORTANT Opps!!! <br /> <br />I wasn't thinking straight, taken out the anti-backlash system to reduce wobble seems to help reduce the wobble BUT the anti-backlash is needed when first homing. <br /> <br />During homing the z axis moves down trips the z end-stop goes back up a short distance and comes back down, a bit slower, to doubled check the zero position, this means the Z axis does needed to go backwards and forwards and that the anti-backlash system is required to reduce errors here. <br /> <br />The whole build could be impacted by removing the anti-backlash system so I do not recommend doing this. <br /> <br />These are just ideas I have not recommendations, so don't copy unless you think they will work for you and triple test everything. <br /> <br />Was advertised for spares or repairs. <br /> <br />It may take some time to get this 3D printer working to a level where it is usable due to lack of budget <br /> <br />Powder Coated Mild Steel Structure With Acrylic Build Platform <br />• Product Type : All In One Printers <br />• Cartridge Type : Original <br />• Utility : 3d Printing <br />• Printing Output : Colored <br />• Print Technology : Fused deposition modelling (FDM) <br />• Size : Large <br />• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform <br />• SUPC: SDL051787633 <br /> <br />My Wordpress Blog will tell you more about:- <br /> <br />Protomaker Black Sprint Original 3D Printer <br /> <br />https://protomaker3dprinter.wordpress.com/ <br /> <br />Tweets about 3D Printers: tips, hardware software, filament ,etc... <br /> <br />https://twitter.com/myvideostowatch <br /> <br />.
