3D Yazıcı ile yapılan bir Jet Motoru. <br /><br />Yapımcısının notlarını çeviri yapmadan paylaşıyoruz:<br /><br />White blades are "Intake"<br />Blue blades are "Compression"<br />Pink blade is "Power"<br />Green blades are "Exhaust"<br />Intake, Compression, Combustion/Power, Exhaust<br />Air is blown against the pink/Power blades, this spins up the inside turbine, (in real life it's usually an electric motor.)<br />Connected to the Power turbine are the Compression blades, these spin up as well and compress the air into the combustion chamber.<br />When the air is compressed enough "Fuel" is added and ignited. <br />This burns and expands, forcing the power turbine to go faster. <br />The burning air/fuel also hit the "Exhaust" blades; these spin the "Intake" blades which push air onto the "Intake" blades, which pushes air into the "Compression" blades.<br />Once the jet is running the "Start" is turned off.<br />This turns the whole thing around and on the end of the shaft is the BIG fan you see when you walk out to your aircraft.<br />The reasons the two fans go in different directions are to cancel out the torque.<br />If they both went in the same direction they would have to push against something to turn, and that would twist the engine off the wing.
