Kapton Tape PLA tested and FAILS pr 5 Kapton Tape Glue Stick <br /> <br />This is Part 5 of my testing Kapton Tape with PLA filament printing, using Glue Stick on Kapton Tape and it FAILS with PLA printed parts lifting from the build plate. <br /> <br />Notes: I tried the same print with the heated bed temperature set to 70° C and then set to 50° C. At 50° C it did stay on the build plate, (shown at the end of this video), and it finish the print without lifting off the print bed, (this indicates a lower heated bed temperature is more beneficial), but I feed this is too unreliable to use this method all the time. <br /> <br />Protomaker Black Sprint Original 3D Printer some repair damage <br /> <br />It may take some time to get this 3D printer working to a level where it is usable due to lack of budget <br /> <br />Powder Coated Mild Steel Structure With Acrylic Build Platform <br />• Product Type : All In One Printers <br />• Cartridge Type : Original <br />• Utility : 3d Printing <br />• Printing Output : Colored <br />• Print Technology : Fused deposition modelling (FDM) <br />• Size : Large <br />• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform <br />• SUPC: SDL051787633 <br /> <br />My Wordpress Blog will tell you more about:- <br /> <br /> <br />Protomaker Black Sprint Original 3D Printer <br /> <br />https://protomaker3dprinter.wordpress.com/ <br /> <br />Tweets about 3D Printers: tips, hardware software, filament ,etc... <br /> <br />https://twitter.com/myvideostowatch <br />.
