BMC Flat-Bed Paddy Dryer with Rice Husk Furnace <br /> <br />Designed and developed by Engr. Alexis Belonio to provide rice processors a technology for drying paddy especially during harvest season where the weather condition is not favorable for sundrying. Drying of paddy is accomplished inside a bin and hot air from a rice husk furnace is used for drying. <br /> <br />Features: <br /> <br />● Simple in construction ● Easy to operate and maintain ● Less labor is required ● Rice husk or other biomass can be used as fuel ● Dries paddy uniformly and with high quality ● Uses engine or electric motor to drive the fan ● Also available in other sizes <br /> <br />Specifications: <br /> <br />Model: FBD-6T <br />Drying Chamber: Concrete - 0.3 m high x 4.8 m wide x 7.2 m long <br />Plenum Chamber: Concrete - 1.2 m high x 4.8 m wide x 7.2 m long <br />Heating Device: Inclined Grate Furnace Model 44W (with heat exchanger) <br />Air Moving Device: 80 cm Vane Axial Fan <br />Power Source: 5 to 7 hp electric motor single phase <br />Loading: Manual loading and unloading <br />Labor Requirement: One (1) person to check dryer operation <br />Drying Temp.: 40-50 C <br />Drying Capacity: 6 tons per batch <br />Drying Time: 10 to 14 hours depending on the moisture content of the product, ambient condition, loading capacity <br />Drying Bed: 2 mm f perforated BI sheet <br />Construction Materials: Concrete, Metals sheets and angle bars <br />Finish: Red oxide and triton enamel paint <br /> <br />For contacts and inquiries: <br /> <br />Mr. Michael Belonio <br />Email: Biz.bulacan@gmail.com <br />Mhbelonio@yahoo.com or Atbelonio@yahoo.com
