Cell: 0092 335 155 00 55 <br />Cell: 0092 321 528 00 52 <br />Cell: 0092 335 522 55 22 <br />https://www.synchcom.com.pk/ <br />https://www.facebook.com/SYNCHCOM.PRIVATE.LIMITED/ <br />https://www.facebook.com/SYNCHCOM <br />https://www.facebook.com/synchcom.com.pk/ <br /> <br />In this video we will show you how to improve VLAN security by limiting access to your traffic data with VLAN tagging (VLAN mapping) configuration. <br /> <br />Considerations: <br />- The Bridge mode is required. <br />- In order to have management in all the network, configure the management VLAN ir the AP and Clients. <br />-VLANs require either a VLAN Switch or a Router. <br /> <br />The VLAN mapping can be done in the Access Point or Station. Do not use the VLAN mapping on the AP and CPE in parallel, because it won't work. <br /> <br />All traffic from clients connected to the same SSID are going to have the same VLAN. <br /> <br />1. Connect the LigoDLB unit to the management IP. <br />2. Enable the map to data VLAN option with an ID between 2-4095 on the Access Point and save your configuration. <br />3. The VLAN tagging can be configured in the Station. Each client requires the map to data VLAN configuration.
