How to connect 2 routers on a single lan through wds (wireless distribution system )? <br /> <br /> <br />*1. make sure you are having a lan connection (internet connection) <br /> <br />*2. min 2 router needed for wds make one router as a access point (primary router) and another <br /> router as a repeater(secondary router) max router is up to your wish.... <br /> <br /> <br /> <br />ACESS POINT (my acess point router is tenda n300) <br /> <br />1. *connect the lan to the main access point router in the wan port <br /> <br />2. open any browser in pc or mobile the default login ip address is 192.168.0.1 (for most of the routers) <br /> pls check back on the router for ip address. <br />3. it will ask for username and password (default username = admin and password = admin) <br /> for most routers its is also given in the back of the router <br />4. after that it will move on to the next page internet connection setup/type below that click on DHCP <br />5. it will automatically connect yout router with lan.... <br />6. And select wireless option->wireless security and disable wps option and setup a security key <br /> or password for your router. <br />7. *In wireless basic settings ->channel and (select any one of the channel) eg: (channel 11) <br /> <br /> <br />REPEATER(secondary router or range extender my secondary router is tp link TL-WR740N) <br /> <br /> <br />1. place the repeater where u need to extend the range of the wifi <br />2. switch on the router and connect with it move on to any browser and type the ip 192.168.0.1 <br /> (its the default ip for most router ) <br />3. it will ask for username and password (default username = admin and password = admin) <br /> for most routers its is also given in the back of the router <br />4. click on wireless->wireless settings ->and check mark the Enable wds option <br />5. click on survey option ->it will move to next window choose the main router (access point router) <br /> and click on connect <br />6. select the channel and specify it which you gave at access point . <br />7. select wireless security and choose wpa/wpa2 and type the passwors for secondary router or repeater. <br />8*disable the DHCP settings <br />9*select network ->and choose lan option -> click on ip and type ip 192.168.0.2 to 192.168.0.100 <br />it will take some time to cofigure new ip wait for it . <br />10 it will restart the router now you will connect to both routers depending on the signal strength <br /> both router ip should be accessed with the connected router .... <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> like,share and follow guys if u like my video <br /> <br /> <br /> thank you guys ....
