How to Replace Your Car Battery <br />Car batteries are built to last for five years. <br />Changing a battery is an easy task which requires limited tools. <br />Check if it Needs To Be Replaced <br /> Check if your old battery has sulfate deposits which form as a blue residue. <br /> Check if your battery has been given enough time to recharge properly. <br /> Check the alternator to ensure that it is functioning properly. <br />Choose the right battery <br />Make sure that you choose the battery that suits your car by: <br /> Checking the dimensions of your old battery. <br /> Specifying your car’s make model and engine size to the vendor. <br /> Purchasing a battery which supports the battery tray size. <br />Before removing the battery <br /> Park your car on a flat surface away from traffic. <br /> Make sure that you work in a well ventilated environment. <br /> Wear safety goggles and protective gloves. <br /> Switch off all electrical components and apply the parking brake. <br /> Ensure that there are no flammable materials present in the garage. <br /> Remove the cigarette lighter to avoid fire accident. <br /> Make sure that the bonnet remains open until the process is complete. <br />Tools which you will require <br /> A new battery. <br /> Battery lithium grease or petroleum jelly. <br /> Two adjustable wrenches. <br /> A wire brush to clean the terminals. <br /> A pair of safety goggles and rubber gloves. <br /> <br />Remove the battery <br /> In most cars the battery is located in the side of the car’s frame. <br /> In some cars they are locate under the matting of the boot/trunk. <br /> The positive terminal will be covered by a red colored cap <br /> The negative terminal will be covered with a black colored cap. <br /> Disconnect the negative terminal by loosening the clamp with a wrench. <br /> Disconnect the negative terminal before the positive terminal. <br /> Unfasten the screws which hold the battery in the frame (if present). <br /> Remove the old battery carefully. <br />Install The New Battery <br /> Clean the terminal clamps and the battery tray using baking soda. <br /> If the terminal ends appear to be corroded you need to replace them. <br /> Place the new battery and connect the screws which hold the battery. <br /> First Reconnect the positive terminal using a wrench followed by the negative terminal. <br /> Apply battery lithium grease or petroleum jelly to prevent corrosion. <br /> Start your car and check if all the electronic devices are functioning well. <br />Important safety precautions to be taken during installation <br /> Never turn the battery upside down or rest it on one side. <br /> Never connect the two terminals directly as it would lead to short circuit. <br /> Do not wear loose clothing try wearing an apron if possible. <br /> Never spray lithium grease on any other region other than the battery terminal. <br /> Do not leave any metal objects on the battery. <br />Visit yellowpages-uae.com to contact Car Battery Replacement Services in UAE i.e. at http://www.yellowpages-uae.com/uae/car-battery-replacement
