Winrar extr file \r<br>\r<br>\r<br>file:\r<br>minimal_adb_fastboot \r<br>\r<br>shieldfamilydriver.zip \r<br>\r<br>\r<br>\r<br>\r<br>Enable debugging & Network debugging \r<br>\r<br>\r<br>NVidia Shield TV Utility App \r<br>\r<br>Preparation\r<br>1.Install Minimal ADB and Fastboot if you do not already have it installed.\r<br>2.Ensure the Shield Family drivers are extred somewhere on your system and you know where they are.\r<br>3.Make sure you know how to get to Device Manager on your PC.\r<br>4.Plug your Shield TV into the PC with USB cable.\r<br>5.Plug your mouse into a USB port.\r<br>6.Confirm drivers for ADB are installed: 1.On your PC, go to Device Manager. Find the yellow ! ADB device. If none exist, you probably already have drivers. \r<br>7.Right click the device and select Update Driver.\r<br>8.When offered, browse your computer for the driver and point it to the Shield Family Drivers folder you extred in Preparation Step 2 above.\r<br>9.When finished with the driver install, the ! yellow device should be gone.\r<br>\r<br>10.Enable Developer mode on Shield TV 1.On the Shield TV, go to Settings About Build tap 7 times on the BUILD to unlock developer mode – you have to back out of Settings and go back in before Developer will appear.\r<br>\r<br>11.Enable USB Debugging on Shield TV 1.Settings Developer Debugging; set to On\r<br>12.A popup should appear asking for this PCs authorization. Check the Dont ask again for this PC box and select Allow. If it doesnt show up now, it will later.\r<br>\r<br>\r<br>ADB over Network\r<br>\r<br>1. Make sure you have performed the above steps Enable debugging\r<br>\r<br>2. Make sure you have performed the above steps ADB over USB\r<br>\r<br>3. Toggle Network debugging to On\r<br>\r<br>Root Procedure\r<br> 1.Launch Minimal ADB and Fastboot from the Start Menu or icon on the PC. This puts you in a black DOS box.\r<br>2.Type “adb devices” and make sure your Shield TV appears. Note: If you didnt have a popup on your Shield TV screen in Step 10.2 above, it probably will appear now. Youll have to authorize the PC before it will show up under adb devices.\r<br>3.Once you see your Shield TV when you run “adb devices” youre ready to proceed.
