Nissan remote fob programming sequence:<br />1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.<br />2. Then turn ignition switch to OFF position. Leave key in ignition switch.<br />3. After 2 seconds, the system will enter programming mode and will flash the warning<br />lights twice.<br />4. Press and HOLD the unlock button on the remote key.<br />5. While pressing the unlock button, press the lock button 3 times.<br />6. Release the unlock button.<br />7. The warning lights will flash once to indicate successful programming.<br />8. Repeat procedure 4 to 7 for up to 4 key’s.<br />9. When completed turn ignition ON, and the warning lights will flash 2 times.<br />10. Remove key, and check all remote key’s for operation.<br /><br />Notes:<br />- This procedure works for these vehicle models:<br />* ALMERA<br />* ALMERA TINO<br />* PRIMERA<br />* MAXIMA<br />* MICRA<br />* SERENA<br />* VANETTE CARGO<br />* TERANO II<br />* Honda Accord<br />* xtrail<br />- The programming mode will stop when either the ignition is switch ON, 4 keys have been programmed or no input signal either from the switch or remote keys has been received for 120 seconds.
