PLAS In-Line Rotary™ Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6” to 8” (153 - 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15° bevel on both sides of the cut. For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness. For cutting PE pipe*, Reed developed a hardened, tool steel blade. The engineered blade tip drives chips out of the way, making PE cuts easy to accomplish. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.<br /><br />•Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.<br />•Only 6"-8" clearance needed to turn PLAS tool around pipe.<br />•Cuts out-of-round pipe because of spring loaded nuts.<br />•Simultaneously cut and bevel PVC using cut-off blade and bevel blade.<br />•This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs!<br /><br />For more information about Reed’s PLAS In-Line Rotary™ Pipe Cutters, visit our website at: https://www.reedmfgco.com/en/products/plastic-pipe-tools/plas-in-line-rotary-pipe-cutters/?utm_source=social&utm_medium=dailymotion<br /><br />To learn more about Reed, to browse all products, or find where to buy, visit our website: https://www.reedmfgco.com./en/?utm_source=social&utm_medium=dailymotion<br /><br />Please contact us with any questions: https://www.reedmfgco.com/en/contact-reed/?utm_source=social&utm_medium=dailymotion<br /><br />Let’s Connect!<br />Facebook: https://www.facebook.com/ReedManufacturing<br />Twitter: https://twitter.com/ReedPipeTools <br />Instagram: https://www.instagram.com/reedpipetools
