DIY Concrete Stool<br />Bookmark Article: https://www.cleverly.me/concrete-stool<br /><br />Thanks for watching and don't forget to subscribe for more DIY crafts & projects, genius life hacks, clever tips & tricks, valuable health hacks, and fun facts! You can find the full information for this video on our website or below ↓↓.<br /><br />******************************************************<br /><br />Making your own stool or side table doesn't take much — all you need is a bucket, three dowel rods, and some concrete. Does that sound a bit too easy? Well, it's not! Check out this video to see just how simple it is.<br /><br />You'll Need:<br /><br />- 11 lbs concrete<br />- 3 cups water<br />- mixing bucket<br />- 3 dowel rods<br />- tape<br /><br />Here's How:<br /><br />1. Choose a bucket that has the same diameter as the stool or table you want to make. Mix the concrete in it, making sure that it is about four inches deep.<br /><br />2. Bang the side of the bucket to get any air bubbles out of the mixed concrete.<br /><br />3. Stick the three dowel rods in the bucket and secure them with tape. Let the concrete harden for at least 24 hours.<br /><br />4. Remove the tape and slowly take the stool out of the bucket. As you can see in the video, it should slide out without sticking.<br /><br />5. Smooth off the surface of the concrete with some very fine sand paper and you're done! You now have a new seat or table for your home.
