COMPONENTS AND SUPPLIES<br /><br />Arduino UNO & Genuino UNO×1<br /><br />HC-05 Bluetooth Module×1<br /><br />Jumper wires (generic)×1<br /><br />Two AC Bulbs(Red,Yellow)×1<br /><br />Relay (generic)Using 2Channel Relay×1<br /><br />APPS AND ONLINE SERVICES<br /><br />Arduino IDE (Android App)<br />Anduino Bluetooth control all in one (Android App)<br /><br /><br />1.Give connection as Per circuit diagram<br /><br />2.Connect the TX of Arduino to RX of bluetooth and RX of Arduino to TX of bluetooth<br /><br />3.Give 5V supply to bluetooth module and ground it.<br /><br />4.Connect relay1 to Digitalpin2 and relay2 to Digitalpin3 of the Arduino<br /><br />5.Then give the AC supply to the relay as required<br /><br /><br />upload program<br /><br />1.Upload the program to the Arduino uno<br /><br />2.If required for more relay connection than just initialize an relay in the program and do a simple if else condition as required.<br /><br />coding and Circuit details here:-https://drive.google.com/folderview?id=15pZlF3XNEZR2ZUgrKpYkGbyB3EIEvIl5<br /><br />Facebook page:- https://m.facebook.com/techutkarsh5/?ref=bookmarks<br /><br />Instagram:- https://www.instagram.com/vatts_utkarsh/
