This video shows how you can Convert Your Normal TV Into a Smart TV using a Raspberry Pi 4. We have used Raspberry Pi 4 Model B in this project. We also used A 16GB Class 10 Micro SD Card; A card holder; A micro HDMI to HDMI cable; Wired/Wireless Keyboard-Mouse; A USB Pen drive. If you have normal Micro SD card, also it will work but for better I/O speed we recommend Class 10 Micro SD Card. It is also recommended to use a heat sink and cooling fan to keep your RPI under normal temperature.<br />Raspberry Pi 4 Model-B Specifications:<br />• Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz<br />• 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)<br />• 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE<br />• Gigabit Ethernet<br />• 2 USB 3.0 ports; 2 USB 2.0 ports.<br />• Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)<br />• 2 × micro-HDMI ports (up to 4kp60 supported)<br />• 2-lane MIPI DSI display port<br />• 2-lane MIPI CSI camera port<br />• 4-pole stereo audio and composite video port<br />• H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)<br />• OpenGL ES 3.0 graphics<br />• Micro-SD card slot for loading operating system and data storage<br />• 5V DC via USB-C connector (minimum 3A*)<br />• 5V DC via GPIO header (minimum 3A*)<br />• Power over Ethernet (PoE) enabled (requires separate PoE HAT)<br /><br />Info Source Courtesy: https://www.raspberrypi.org/<br /><br />-----------------------------------------------------------------------------------------------------------<br />
