We show you how to make a DIY School Sneeze Guard with Banner Ups. This DIY solution is low and easy to set up. You will need PVC pipe, Banner Ups adhesive tabs, and PV-Shield sheeting. Cut the PVC pipe to the desired length and height then build the frame. Once the frame is build cut the clear PV-Shield sheeting to fit within the frame. Next, apply Banner Ups adhesive tabs to all four corners of the PV-Shield sheet and punch holes. The Banner Ups tabs are super strong and will maximize the durability of the sheets. <br /> <br />To receive free samples, design ideas, and pricing please email us at bannerups@budnick.com or visit www.bannerups.com <br /> <br />Time Stamps <br />0:00 - Intro <br />0:25 - Sneeze Guard PVC Assembly <br />0:30 - Clear PV-Shield Film <br />0:38 - PV-Shield Roll and Cut <br />0:44 - Apply Banner Ups Tabs to Corners <br />0:52 - Tab durability <br />1:00 - Look how clear PV-Shield is <br />1:06 - Low-cost solution <br />1:13 - Frame examples <br />1:16 - Donation of Tabs <br />1:25 - Contact information