C DATA GPON OLT Config as a Uplink Trunk and all PON Ports Trunk on VLAN 100. We will config C-Data GPON OLT on Putty command line. you can easily config this OLT by watching my video. We will create service profile , line profile as well then allow these profile on every ONT. you can use Tenda ONT for better performance. <br />Tenda GPON OLT "TES7008" is 1U rack-mounted device with1 USB interface, 4 uplink GE ports, 4 uplink optical ports, 2 10-gigabit uplink ports and 8 GPON ports, each GPON port supports the splitting ratio of 1:128 and provides downstream bandwidth of 2.5Gbps and upstream bandwidth of 1.25Gbps,system support 1024 GPON terminals accessing in for the most .<br />You can easily config Tenda Gpon OLT TES7008.<br />Just copy and paste bellow commands on Terminal.<br />*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈<br />enable<br />config<br />ont-lineprofile gpon profile-id 1 profile-name "lineprofile_1"<br /> #tcont 0 dba-profile-id 0<br /> tcont 1 dba-profile-id 1<br /> gem add 1 tcont 1 encrypt off<br /> gem mapping 1 1 vlan transparent<br /> commit<br /> exit<br />!<br />interface gpon 0/0<br /> ont autofind all enable<br /> ont authmode all manual<br /> ont policy-auth all enable<br /> exit<br />!<br />ont policy-auth enable<br />ont policy-auth policy all ont-lineprofile-id 1 ont-srvprofile-id 0<br />vlan 2-4094<br />!
