"**DMG3415UFY4-7-VB**<br /><br /><br /><br />- **Brand:** VBsemi<br />- **Parameters:**<br />- Package type: SOT23<br />- Channel type: P-Channel<br />- Maximum withstand voltage: -30V<br />- Maximum drain current: -5.6A<br />- On-state resistance (RDS(ON)): 47mΩ @ VGS=10V, VGS=20V<br />- Threshold voltage (Vth): -1V<br /><br />- **Application introduction:**<br />DMG3415UFY4-7-VB is a P-Channel power MOSFET packaged in SOT23. Its features include low on-state resistance and suitability for load switching and power management applications. <br /><br />- **Detailed parameter description: **<br />1. **Package Type: ** SOT23, which is a small surface mount package suitable for dense circuit board design. <br />2. **Channel Type: ** P-Channel, indicating that this is a P-channel MOSFET. <br />3. **Maximum Drain-Source Voltage: ** -30V, which is the maximum drain voltage that the device can withstand. <br />4. **Maximum Drain Current: ** -5.6A, indicating the maximum drain current that can pass. <br />5. **On-state resistance (RDS(ON)): ** 47mΩ @ VGS=10V, VGS=20V, indicating the maximum value of the on-state resistance under a given gate-source voltage. <br />6. **Threshold Voltage: ** -1V, which is the gate-source voltage at which the device starts to conduct. <br /><br />- **Application Areas:**<br />1. **Load Switching:** Due to its P-channel nature and moderate current capacity, it is suitable for load switching circuits, such as power management units (PMUs). <br />2. **Power Management Modules:** Used to build power management modules, such as power switches and current controllers. <br /><br />- **Module Application Examples:**<br />1. **Power Switch Module:** DMG3415UFY4-7-VB can be used to design compact power switch modules for various portable devices. <br />2. **Power Management Unit (PMU):** In mobile devices, as part of the PMU, it controls the switching of power and provides effective power consumption management. <br /><br />Please note that the above are only general explanations and application suggestions for the given parameters. Further consideration of circuit requirements and system specifications is required for specific design."<br />
